Safety testing and energy efficiency

1. Overview

Electronic and electrical safety is committed to assisting customers in eliminating safety hazards in the design phase of products, conducting qualification testing for potential crises such as electric shock, hazardous energy, mechanical and thermal hazards, and fires, in order to avoid causing greater losses.

Main coverage: information technology equipment, audio and video equipment, lighting fixtures, driving power supplies, household appliances, batteries, power tools, motors, controllers, photovoltaic products, etc.

2. Service Content

① Assist customers in eliminating safety hazards during the product design phase, such as circuit electrical clearances, creepage distances, safety isolation, etc., evaluate structural design, and avoid significant losses from mold modifications.

② Conduct electrical testing and structural evaluation during the initial stage of product certification, and submit an audit report.

③ Communicating with certification agencies on behalf of clients and executing application documents on their behalf can help clients save application time and reduce tedious processes.

④ Assist clients in handling issues arising from factory audits and provide guidance on factory audit related matters.

⑤ Assist manufacturers in training safety personnel

⑥ Consultation on safety regulations and standards in various countries

⑦ Laboratory rental

3. Testing standards

　　(1) information technology equipment 

　　GB 4943.1, IEC/EN/UL 62368, IEC/EN/UL 60950-1, CAN/CSA-C22.2 N0.60950, AS/NZS 60950.1, J60950, K60950

　　(2) Audio and video equipment

　　GB 8898, IEC/EN/UL 62368-1, IEC/EN/UL 60065, AS/NZS 60065, CAN/CSA-C22.2 NO. 60065, J60065, K60065

　　(3) Power supply category

　　IEC/EN/UL 60950-1, IEC/EN/UL 60065, IEC/EN/UL 62368-1, IEC/EN/ES 60601-1, IEC/EN 60335-2-29, IEC/EN 61558-1/-2, UL 1310, UL 1012, UL 2089, UL 697

　　(4) Uninterruptible power supply(UPS)

　　GB 7260.1, GB/T 7260-3, IEC/EN 62040-1, IEC/EN 62040-3, AS62040.1.1, UL 1778

　　(5) medical apparatus and instruments

　　GB 9706.1, GB 9706.15, GB 10793, GB 9706.25, IEC/EN 80601-2-35,IEC/EN/ES 60601-1/-2, AS/NZS 3200.1/.2

　　(6) Instrument and equipment

　　GB 4793.1, GB 4793.5, IEC/EN 61010-1, IEC/EN 61010-031, AS 61010.1, AS 61010.031

　　(7) transformer

　　GB 19212.1/.2, IEC/EN 61558-1/-2, UL 5085, UL 1411, AS/NZS 61558.1/.2

　　(8) Battery

　　IEC/EN 62133, UL 1642, UL 2054, UN 38.3, MH/T 1020, Electrical Appliance and Material Safety Law, Article 8, Paragraph 1, Attached table 9

　　(9) Plug

　　EN 50075, AS/NZS 3112, BS1363

　　(10) Electric automatic controller

　　GB 14536.1/.2, IEC/EN 60730-1/-2

　　(11) lamps and lanterns

　　GB 7000.1/.2, GB/T 24825, GB/T 17263, GB/T 24908, GB/T 17263, GB/T 24823, GB/T 20145, GB 13961, GB/T 7002, GB/T 9468, IEC/EN 60598-1/-2, IEC/EN 62384, IEC/EN 61167, IEC/EN 60969, IEC/EN 62612, IEC 62717, IEC/EN 62722-1/2, IEC/EN 62471, IEC/EN 60570, EN 62031, EN 60081, EN 60901, EN 62035, EN 60188, EN 60662, EN 50294, EN 12464-1, EN 62493, CIE043, CIE121, UL 1993, UL 1598, UL 153, AS/NZS 60598.1/.2, JIS C 6598.1/.2, K60598.1/.2

　　(12) Lamp control device

　　IEC/EN 61347-1/-2, UL 8750, UL 935, AS/NZS 61347.1/.2

　　(13) Laser products

　　IEC/EN 60825-1, AS/NZS 60825.1

　　(14) Household Electric Appliances

　　IEC/EN 60335-1/-2, AS/NZS 60335.1/.2, GB 4706.1/.2, EN 62233, UL 982, UL 1026, UL 1082, UL 1083, UL 1431, UL 197, UL 859, UL 507, UL 1647, UL 141, UL 1005

　　(15) TV stand

　　UL 1678

　　(16) Mobile electric tools

　　IEC/EN 60745-1/2, UL 60745, AS/NZS 60745.1/.2

　　(17) Industrial control products, relays

　　UL 508

　　(18) Water pump

　　UL 778

　　(19) Motor

　　GB 12350, GB/T 5171.1, IEC/EN 60034-1

　　(20) Insulation system

　　UL 1446

　　(21) Car charger

　　UL 2089

　　(22) Toys

　　GB 19865, IEC/EN 62115, EN 71

　　(23) Environmental and reliability testing

　　IEC 60068-1/-2

　　(24) Horizontal and vertical combustion tests

　　GB/T 2408, GB/T 5169.16, GB/T 5169.17, IEC/EN 60695-11-10, IEC/EN 60695-11-20, UL 94

　　(25) Burning test

　　GB/T 5169.10, GB/T 5169.11, GB/T 5169.12, GB/T 5169.13, IEC/EN 60695-2-10, IEC/EN 60695-2-11, IEC/EN 60695-2-12, IEC/EN 60695-2-13

　　(26) Needle flame test

　　GB/T 5169.5, IEC/EN 60695-11-5

　　(27) Ball pressure test

　　GB/T 5169.21, IEC/EN 60695-10-2

　　(28) softening test 

　　GB/T 1633, ISO 306, EN ISO 306, ASTM D1525

　　(29) tracking test

　　GB/T 4207, IEC/EN 60112

　　(30) Energy efficiency testing

　　GB 19415, GB 19044, GB 19043, GB 20943, GB 24850, GB 12021.7, GB 21520,GB 25957, GB 28380, GB 25956, GB 21521, CQC 3114, CQC 3134, IEC/EN 62301, IEC/EN 62087, IEC/EN 60969, EN 50564, EN 50563, EN50285, (EC) No 1275/2008,(EC) No 642/2009, (EC) No 107 /2009, (EC) No 278/2009, (EC) No 244/2009,(EC) No 859/2009, (EC) No 245/2009, AS/NZS IEC 62301, SANS 62301,AS/NZS 62087.1, SANS 62087, (EU) No 1062/2010, (EU) No 801/2013, 2105:2013, 2106:2013, AS/NZS 62087.2.1/.2.2, AS/NZS 4665.1/.2, AS/NZS 5815.1/.2,AS/NZS 5814.1, AS/NZS 5813.1, SANS 941, CSA-C381.1, CSA-C62301, COC VS,10 CFR Parts 429 and 430, 3 47 /2010/EU, CIE18.2, CIE13.3, CIE15, CIE84, CIE97,EN 60357